INSTOCK WIRELESS

Home > INSTOCK wireless

Custom Built Wireless Controllers

Short Range Wireless

Remote Control Systems
UP TO 1/2 MILE ( 800 meters )

Short Range Wireless

Remote Control Systems
UP TO 1/2 MILE ( 800 meters )

Short Range Wireless

Remote Control Systems
UP TO 1/2 MILE ( 800 meters )

If our stock systems don’t meet your specifications, REQUEST A QUOTE for a custom system.

Extended Range MX Modules

Applications:  Industrial Monitoring, Pump control, Monitor remote sites, Tank Level,
Lighting control, Remote Mobile system, PLC remote, SCADA, Irrigation, Gates.
Factory process control,  Alarms, Generators,  Solar,  Wire replacement.

 

Performance  3 miles ( 5 Km ) line-of-sight
• Extended range up to 20 Km
• Not limited to line-of-sight communication

Up to 10 Km of line-of-sight range with MXT4
Up to 3 Km  with handheld device MXTH-4
Migro Encoding/Decoding technology
Four (4) Independent Channels
Output selection: Latch or Momentary
Shielded Metal case NEMA4 – IP65
Antenna  931501 or 931487 (not included)
Power: 12 VDC – Solar Ready
Dip Switch 12 Bit Code setting
Multiple Transmitters and Receivers
Optional repeater if necessary
Factory pre- configured system, Ready
No setup or programming required
No fees from carriers, No hacking
No software or internet

   Specifications       Digital Transmitter  
Supply power
  Inputs
Transmitter power
Frequency
Transmission
Channels
Power draw
Response
Weight
Dimensions
12VDC /  8Watt  N/O Normally Open, digital dry contact per FCC Part 15.249,  50mV/m @ 3m 154MHz  • License free MURS band Digital Encoded   Gaussian_frequency-shift_keying Channels 16 addresses per system  GFSK Standby 1mA, Transmission 1200mA Loop 500 msec 5.36 lb ( 2.44kg )  each unit NEMA4, IP65  8.76" W x5.75" H x 3.24" D
   Specifications       Digital Receiver   
Supply power
  Output
Output mode
Configuration
Compliance
Channels
Power draw
Antenna Z
Ambient temp
Enclosure
12VDC /  5Watt 
Relay 8Amp, SPDT (NO/NC) Class 2 Pilot Duty
(*) Continuous - Momentary or Latching
DIP switch factory preset
FCC CFR part 15.247, 95 sub E
Standby 30mA, Full load 400mA
50 Ohm, RF Connector  SO-239
 14° to 140° F (-10° to 60° C)
 NEMA4, IP65  8.76" W x5.75" H x 3.24" D

COMPLIANCE: per FCC Part 15.249, 50mV/m @ 3m
Circuit board Compliance with UL796 and UL 94
MIL-STD-461E for Electro-Magnetic Interference (EMI)
MIL-STD-901D Grade A for High Impact Shock
MIL-STD-167B for Vibration
MXT-4 Transmitter   $499.99

MXR-4 Receiver   $489.99

Bidirectional Wireless 4 Channel I/O Digital - 943108A AND 4 Channel Wireless Control System - 943408TR

Applications: Field operations, irrigation, PLC remote i/o, lighting, process, pumps, generators, solar systems, water management, plantations, remote monitoring, mobile, security, robots, conveyor control, traffic control, test and research equipment, industrial process, plc extension, gate remote, alarm annunciator, hazardous area remotes, Wire Replacement.

 

 No parameterization nor programming required
 No Internet, Transparent I/O System
 No Third party cell, No monthly fees
 You have full control over your own carrier
 Power system 12/24VDC solar ready
 Real time status feedback from the remote site
 Fast installation and easy setup
 Standard DIN rail mount 35mm

 

 2 Miles (3.km) line-of-sight with Yagi 7 dBi antenna 
 ■ Optional Extended range 20km+
 ■ Full duplex bidirectional transmission 

 

Bidirectional Wireless 4 Channel I/O Digital – 943108A

 

■ Set with Master & Slave  Modules

   Operation 433MHZ ISM Band

 2 Way Module Each with:

 

 ■ 4 Digital inputs, N/O Dry Contact, 

 ■ 4 Relay outputs SPST  5A, 240V Pilot duty class 2

 ■ Operation 12 or 24 VDC   Optional 120/240VAC

 

4 Channel Wireless Control System – 943408TR

■ Set with Transmitter and Receiver

    Operation 433MHZ ISM Band

 ■Transmitter  4 Digital inputs, N/O Dry Contact, 

 ■ Receiver 4 Relay outputs SPST 5A, 240V Pilot duty class 2

 ■ Operation 12 or 24 VDC    Optional 120/240VAC

Specs, applications and information for both:

Digital Input / Output
Supply power Inputs Outputs Output Mode Ambient temp Ambient RH Connection Response Weight Dimensions w optional NEMA4 Enclosure
12 /24 VDC ±10% @ 600 mA N/O Normally open digital dry contact Relay contact 5Amp SPST 240V Pilot duty Normal or Retain status 14° to 140° F (-10° to 60° C) 5% to 95% RH non condensing Terminal screws DIN 500 msec full duplex 5.2 lb (2.40kg) each unit, 2 and 4 channel 12"W x 10"H x 6"D (300 x 240 x 150 mm)
Radio System
Frequency Receiver Configuration Data rate Antenna external Compliance Digital Transmission Transmitter channels Transmitter power Enclosure Selection
433 MHz license free industrial Digital 16 bit, sensitivity -110 dBm DIP switch 19.2 KBPS Encoded 50 Ohm (optional) FCC CFR part 15.247 ISM Gaussian_frequency-shift_keying 16 addresses per system per FCC Part 15.249, 50mV/m @ 3m NEMA4 selection: Fiber or Metal.
How to Buy

For More Informatoin About
Purchasing MIGRO Products
Call (833)-353-2870