Home |   Privacy   |   Contact    
View Cart
   Home
   Irrigation
    
  Complete system with 1 channel Transmitter and Receiver range 4 MILES ( 6 Km ) Line of sight

937111    Application:
Lighting control, tank level, irrigation, filling station, water feed, conveyor, water management, gate access control, flow control, automatic  level, machine control, farm well pump control, traffic, security.

  Transmitter & Receiver Kit

1  Transmitter Dry contact input  
1  Receiver pre-wired,
Relay Output 10 Amp @250V
  
2  Long Range 3 f Antenna w coax  cable
2  Aluminum Die Cast Hinged Waterproof Enclosure
  U-Bolt Pole Mounting Hardware included.

  Optional Solar Panel

 

   Specifications
 
Operating Voltage: 12  VDC  Solar ready
Operating Temperature: -4 to +140 F (-20 to +60 C)
 Number of Codes: 65,536 DIP switch programming, 
Carrier Frequency 27 MHz , 16 BIT Digital industrial band
Current Transmitter Standby 15 A,  Transmitting 2.0 Amps (1 sec)
Current Receiver Standby,  25 mA,  Operation 65 mA
Transmitter Input   Dry contact 
Receiver Relay Output 10 Amp max  250VAC N/O and N/C
Antenna Impedance 50 Ohms Quarter Wave Antenna optional
Dimensions: 10 in L x 8 in W x 4 in H (300 x 200 x 100 mm)
Weight 8 lb. (4 Kg) each
Enclosures  Aluminum Die Cast Hinged Waterproof

OPTIONAL: Supervised Module 937881
Supervised mode: Checks the system every 10 minutes for operation, Carrier, power loss or tampering. Automatic security disconnect
   Operation:
    
 Mode  Transmitter Receiver
 Normal Close switch

Open switch
 Turn ON:

Turn OFF


 

937211  Application:
Lighting control, tank level, irrigation, filling station, water feed, conveyor, water management, gate access control, flow control, automatic  level, machine control, farm well pump control, traffic, security.

  Transmitter & Receiver Kit

1  Transmitter Dry contact input  
1  Receiver pre-wired,
Relay Output 10 Amp @250V
   Output mode: Momentary, Toggle or Timed
 

2  Long Range 3 f Antenna w coax  cable
2  Aluminum Die Cast Hinged Waterproof Enclosure
  U-Bolt Pole Mounting Hardware included.

  Optional Solar Panel

      Specifications

   Specifications
 
Operating Voltage: 12  VDC  Solar ready
Operating Temperature: -4 to +140 F (-20 to +60 C)
 Number of Codes: 65,536 DIP switch programming, 
Carrier Frequency 27 MHz , 16 BIT Digital industrial band
Current Transmitter Standby 15 A,  Transmitting 2.0 Amps (1 sec)
Current Receiver Standby,  25 mA,  Operation 65 mA
Transmitter Input   Dry contact 
Receiver Relay Output 10 Amp max  250VAC N/O and N/C
Antenna Impedance 50 Ohms Quarter Wave Antenna optional
Dimensions: 10 in L x 8 in W x 4 in H (300 x 200 x 100 mm)
Weight 8 lb. (4 Kg) each
Enclosures  Aluminum Die Cast Hinged Waterproof

OPTIONAL: Supervised Module 937881
Supervised mode: Checks the system every 10 minutes for operation, Carrier, power loss or tampering. Automatic security disconnect
   Operation:
    
 Function  Start  Stop
Momentary Close switch: Turn ON 4 seconds and OFF
Toggle Press button: Turn ON Press button again:  OFF
Continuous Close switch: Turn ON Open switch: Turn OFF
Time interval Close switch; Turn ON After preset time OFF


 

DISCLAIMER:  Contact a licensed professional for your project.
 
 

 Privacy | Contact    Migro All rights reserved.   TopTop