Wireless Controls and Automation    

 

HOME 154 Industrial Radio 433 Universal Radio Wi-Fi Controller Contact  
   
 

Industrial Wireless Radio Controls 


Please request a quotation

   Specifications      Digital Transmitter
Supply power 120/240VAC or 12VDC /  5watt 
Inputs  N/O Normally Open, digital dry contact
Transmitter power per FCC Part 15.249,  50mV/m @ 3m
Transmission Digital Encoded   Gaussian_frequency-shift_keying
Power draw Standby 1mA, Transmission 1200mA
Channels 16 addresses per system  GFSK
Input Wiring Din Terminals,  Dry Contact
Response Loop 500 msec
Weight 6.8 lb (3.40kg)  each unit
Dimensions Weatherproof, IP65 9"W x 9"H x 4"D (240 x 240 x 100 mm)
FCC ID OHKFMT154 Class B Devices: Designation 20KOF1D

   Specifications      Digital Receiver 
Supply power 120/240VAC or 12VDC /  5watt 
Output   Relay 10Amp, Class 2 pilot duty
Frequency 154MHz  • License free MURS band
Configuration DIP switch factory preset
Compliance FCC CFR part 15.247, 95 sub E
Wiring Screw Terminals
Antenna Z 50 Ohm
Ambient temp  14° to 140° F (-10° to 60° C)
Enclosure Weatherproof, IP65  9"W x 9"H x 4"D (240 x 240 x 100 mm

                                        Please request a quotation
  Antenna Selection
150MHz  2 Meter   Omni Antenna ( 5/8 ) 150MHz  2 Meter Omni  High Gain ( 7/8 ) 150MHz  2 Meter  3 Element Yagi Antenna
931487
Tx Pattern
931490
Tx Pattern

931503  Transmission Pattern

 
Optional
WiFi extension module, access your system from anywhere   
9WIFI

 

   Long Range Wireless Systems  915400   FCC Certified ID: OHKFMT154

Applications:

Industrial Monitoring, Pump control,
Monitor remote sites, Tank Level,
Lighting control, Remote Mobile
PLC remote, Marinas, Irrigation, Gates.
Factory process control, 
Generators,
Alarms, Solar,  Wire replacement.

      
 

 Performance
6 miles ( 10 km ) line-of-sight w Omni 6.7dBi antenna
 Extended range up to 20 km,  Optional Repeater,
Receiver with signal strength indicator ■■■ ■ ■
Operation: 120/240VAC Available in 12VDC, 24VDC or 24VAC (Special Order)
Transmitter input N/O Dry contact
• Relay Output SPDT, 10A @250VAC Class 2 pilot duty
Heavy Duty Weatherproof, IP65  enclosure
• License free operation MURS band 154MHz
• Factory configured systems, Ready to operate
• No setup or programming required
• Not limited to line-of-sight communication


 

2m Selection:  
915404   System 4 Channel
915414   Receiver 4 Channel
915424   Transmitter 4 Channel

915408   System  8 Channel
915418   Receiver 8 Channel
915428   Transmitter 8 Channel
 

   
Transmission Mode Receiver Operation Options: 

   Off  Delay Timing
 
  Pulse Output
 
  Latching for each channel
 ■
 Continuous (1*) optional

 ■  A  Continuous (1*) Output (Tx Time Override )
 ■  B  OFF Delay Timer
 ■  C  Channel 1 Start, Channel 2 Stop
 ■  D  Latch Output Any Channel
 ■  E 
Fail-Safe Mode

   

Basic Package Kit include:  One Base Transmitter, One Base Receiver 
Two 34" Omni Antennas with 10ft coaxial cable, Weatherproof Enclosures & Instructions
 


 
915427  Fail - Safe 
Single Channel  System:

One Transmitter - Receiver 1CH
 in Weatherproof  Enclosure
Two Omni Antennas 931487
with 12ft Coax Cable

Specifications

915428  Start - Stop 
Two Channel  System:

One Transmitter - Receiver  2 Ch
 in Weatherproof Enclosure
Two Omni Antennas 931487
 with 12ft Coax Cable


Specifications

.


DISCLAIMER:
 
Radio control equipment in not to be used in life safety.
Radio Installations shall be performed by a certified professional.
 

 (1*) Maximum continuous transmission time per FCC; 5 minutes

     Copyright ©  Electrodepot. All rights reserved