Wireless Modules
  Call    561 210 5061
   
 
Industrial Wireless Radio Controls 
Panel Mount Ready
 
Performance
■ 1 Mile (2.km) line-of-sight 938432 ant.
■ 3 Miles (5 km) line-of-sight 938433 ant.
■ 1200. f (300.m) in-building range 3dbi
■ Input Dry isolated contact N/O
■ Relay output SPDT 6 Amp 240V/30V
   

Installation features
■ Operation license-free 433MHz ISM band
■ Easy installation,
No programming
■ Panel mount or clip onto DIN-35mm rail
 
 Operation   Transmitter Receiver
 Continuous: Close switch
Open switch
Relay ON
Relay OFF
.

Applications:
Industrial Monitoring,
Pump control, Monitor remote
instruments, sensors,
Lighting, Packing and mobile system,
PLC remote, SCADA,
Factory process control
Generators. Remote alarms.
Solar, Wire replacement

Specifications

Request a Quotation

Wiring Example*

.
931281 Single (1) Channel  Wiring 

Transmitter & Receiver
12V
931282  Two (2) Channel  Wiring

Transmitter & Receiver
12V
931284 Four (4) Channel  Wiring 

Transmitter & Receiver
12V
932281 Single (1) Channel  Wiring

Transmitter & Receiver
120/220VAC

Wiring example*
932282  Two (2) Channel  Wiring

Transmitter & Receiver 120/220VAC

Optional Battery Back Up System
932284 Four (4) Channel  Wiring
   
Transmitter & Receiver
120/220VAC

Optional Battery Back Up System


   Specifications      Digital Transmitter
Supply power 12 VDC @ 400 mA
Inputs  N/O Normally Open, digital dry contact
Transmitter power per FCC Part 15.249,  50mV/m @ 3m
Transmission Digital Encoded   Gaussian_frequency-shift_keying
Channels 16 addresses per system  GFSK
Input Wiring Din Terminals,  Dry Contact
Response Loop 500 msec
Weight 0.8 lb (0.40kg)  each unit
Dimensions 4.50 x 3.50 x 3.25 in. /  (114.30 x 88.90 x 86.75 mm)

   Specifications      Digital Receiver 
Supply power 12 VDC  @ 300 mA
Output   Relay SPDT  contact 6.Amp, 30V/240vac  Class 2 pilot duty
Frequency 433 MHz  • License free Industrial ISM band
Configuration DIP switch factory preset
Compliance FCC CFR part 15.247, 95 sub E
Wiring Components mounted on 35mm DIN rail
Antenna Z 50 Ohm SMA RF connector
Ambient temp  14 to 140 F (-10 to 60 C)
DIN Rail  IP22, UL94-5VA, DIN mount 35mm or panel mount

 

   You may Add  a Contactor, Timer, UPS Battery Backup to the DIN rail radio system

     Show system with optional Timer at the receive


930080 series

DISCLAIMER:  Radio control equipment in not to be used in life safety.
Radio Installations shall be performed by a certified professional.

 

 



Antenna Selection ( TWO  are required )
 

938432  
Yagi antenna 3 E


7 dBi  1 Mile+
Length: 18",
Weight: 1.lb
with 10 ft coax cable
and connector

938434  
Yagi antenna 12 E


 14 dBi  3 Mile+
 Length: 43",
Weight: 3.lb

 with 10 ft coax cable
 and connector

 

 

 

938092

14" Omni Antenna 

3 dBi  2000ft line of sight
10ft coax cable
 SMA

938091

 7" Omni Antenna 


0 dBi Short range
5ft coax cable
 SMA
 


   

Wireless Radio Controls Modules  with UPS for Battery Backup



 
 

 Optional Enclosure NEMA 4

■ Fiberglass enclosure
■ Pole or wall mount ready
■ Screw hinged cover, with
■ Aluminum internal sub panel
■ UL/cUL NEMA/CSA 4
■ UL #E345005

 

 

     Copyright   Electrodepot. All rights reserved     93DIN433