Industrial wireless monitoring and control systems

 

Industrial Wireless Radio Controls 

  Performance
6 miles ( 10 km ) line-of-sight w Omni 3.5dBi antenna
 Extended range up to 20 km
Receiver with signal strength indicator ■■■ ■ ■
Operation: 120/240VAC or 12VDC
Transmitter input N/O Dry contact
• Relay Output SPDT, 10A @250VAC Class 2 pilot duty
Heavy Duty NEMA4, IP65  enclosure
• License free operation MURS band
• Factory configured systems, Ready to operate
• No setup or programming required
• Not limited to line-of-sight communication
.
   Specifications      Digital Transmitter
Supply power 120/240VAC or 12VDC /  5watt 
Inputs  N/O Normally Open, digital dry contact
Transmitter power per FCC Part 15.249,  50mV/m @ 3m
Transmission Digital Encoded   Gaussian_frequency-shift_keying
Channels 16 addresses per system  GFSK
Input Wiring Din Terminals,  Dry Contact
Response Loop 500 msec
Weight 18 lb (9.40kg)  each unit
Dimensions* 12"W x 10"H x 6"D (300 x 260 x 150 mm)

   Specifications      Digital Receiver 
Supply power 120/240VAC or 12VDC /  5watt 
Output   Relay  8Amp, Class 2 pilot duty
Frequency 154MHz  • License free MURS band
Configuration DIP switch factory preset
Compliance FCC CFR part 15.247, 95 sub E
Wiring Screw Terminals
Antenna Z 50 Ohm
Ambient temp  14° to 140° F (-10° to 60° C)
Enclosure  NEMA4, IP65 

 Dimensions *  Final Component layout and Dimension may vary
  

   • Antenna Range Calculator

     Long Range Wireless Systems  154MHz
 
Applications:
Industrial Monitoring, Pump control, Monitor remote sites, Tank Level,
Lighting control, Remote Mobile system, PLC remote, SCADA, Gates.
Factory process control,  Alarms, Generators
Solar,  Wire replacement.
 
  Part #       Please request a quotation 2m  ■ Part #     With Handheld Transmitter

915404  NEMA4
System 4 Channel
915414  NEMA4 Receiver 4 Channel
915424  NEMA4 Transmitter 4 Channel

915408  NEMA4
System 8 Channel
915418  NEMA4 Receiver 8 Channel
915428  NEMA4 Transmitter 8 Channel
 
916022  Handheld Transmitter 3km
916024  Handheld Transmitter 6km

916604  NEMA4 Receiver 4 Channel
916544  NEMA4 Receiver 8 Channel

 Please request a quotation

 
 4 Channels Wiring Layout  
 


fdfgd
Transmission Mode Special Options: 

 ■  Continuous (1)
 
  Off  Delay Timing
 
  Pulse Output
 
  Latching for each channel

 ■ Fail Safe sequence module
 ■ Battery Backup module
 ■ Low Battery Alarm
 ■ High, Low Status level indicator lamp
 ■ Automatic Start/Stop module
 

   

Package Kit: 
One  Base Transmitter, One  Base Receiver 
Two 34" Omni Antennas with 10ft coaxial cable, NEMA 4 Enclosures & Instructions

 Please Request latest price

     Antenna Selection

COMPLIANCE: FCC Certified ID: OHKFMT154
MIL-STD-461E for Electro-Magnetic Interference (EMI)
MIL-STD-901D Grade A for High Impact Shock
MIL-STD-167B for Vibration
 

 

  DISCLAIMER:  Radio control equipment is not to be used in life safety. Radio control systems are subject to applications, environmental and atmospheric conditions,
   We are not liable of failures on miss applications, radio black outs or interruption of the transmissions.  Radio Installations shall be performed by a certified professional.
     Copyright  ® Electrodepot is a  registered trade name of AM Products inc